TE-10D digital clip-on thermoregulator with clamp (fits all water baths)
TE-10D digital thermoregulator, supplied with clamp (230V) (fits all baths)
The Thermoregulator is designed to be used with the Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.
Additional information
Techne® invented the "Clip On" thermoregulator in 1948, and now offer four units. Thermoregulators are designed to be used with the Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits.
- Temperature range of -40°C to 120°C
- Please note for sub-ambient cooling a Dip Cooler or Flow Cooler is required. (Contact us)
- Applications <0°C and >100°C require Techne bath oil. Click here.
- Excellent temperature stability: ±0.01°C at 40°C
- 4 digit setting with a bright LED digital temperature display
- Suitable for most routine laboratory applications
- User adjustable over-temperature cut-out
- Low liquid level cut-out as standard
Sub-ambient cooling
This thermoregulator can be used for sub-ambient cooling, right down to -40°C, although a low-temperature liquid is required below 0°C. Sub-ambient cooling can be achieved using the cooling coil accessory (part number FCC01) connected to an external chilling system, for example a cold tap. Alternatively a Techne dip-cooler or flow cooler could be used as a method of chilling.
External circulation
This thermoregulator can be used in several ways. (1) Stand-alone waterbath temperature controller with precision accuracy and stirring action. (2) Pump for recirculating chilled liquid produced in an external chiller allowing sub-ambient water bath temperature. (3) Pump for providing temperature control to an external system or device. (4) A combination of using externally chilled liquid and providing temperature control to an external system.
Specifications to DIN 12876 | TE-10D |
Temperature range* | -40°C to +120°C |
Temperature selec tion | Digital |
Temperature stability using water @ 40°C | ±0.01°C |
Method of control | PID |
Temperature sensor | PRT |
Adjustable over-temperature cut-out | Yes |
Low liquid level cut-out | Yes |
Pump capacity litresminute | 10 |
Pump capacity (mbar) | 145 |
Nominal heater power at 120V (W) | 1000 |
Nominal heater power at 240V (W) | 1000 |
Extension below base (mm) | 145 |
Dimensions L x W x H (mm) | 237 x 124 x 260 |
Shipping weight | 3.9kg |
We also recommend
Supplying Medical Equipment to the NHS for over 20 years
With excellent service and after sale support. Please dont hesitate to contact us.